5 foot tall access gate with support frame and two side braces (braces go directly in the ground without ground sleeves)

Access gate details:

Includes hinge side support post and latch side post with ground sleeves for each and also gate hardware

Note on gate hardware: over the years we have upgraded the hardware and tubing used in these gates (our tubing is roughly one tubing gauge thicker than other gates of this type on the market). For example, the corners in the gate hardware are black galvanized steel (as opposed to aluminum found in most gates of this type). The hardware is also black - screws, turnbuckle assembly, cable clamps and even the support cable is black.

Access gates use the fence mesh from your fence kit (the gates are universal to all types of fencing) no fencing is included

6ft gates and taller have a bar across the top that connect the hinge side post with the latch side post for stability. Shorter gates (5 1/2ft tall and shorter) include two diagonal side 1 3/8 braces.

Access gates use the same 1 5/8 support posts as found in our line posts. These are US made steel posts which are galvanized inside and out then black powder coated. The rest of the gate consists of the same tubular steel with the same coating and finish in a smaller 1 3/8 size.

Access gates are shipped to be installed in ground sleeves like our line posts. Ground sleeves require a driving anvil tool but do not require concrete. A standard driving anvil tool is found here: driving anvil 

Ground sleeves are driven into the ground with a sledge hammer; support posts then telescope inside the sleeves and lock in with a set screw (patent pending). This also makes the access gate (along with your line posts) completely removable for larger equipment access or seasonal take down.